| VENDORS | ||
| Accutemp | (4) | |
| Cleveland Range | (6) | |
| Groen | (3) | |
| Hobart | (1) | |
| Vulcan-Hart | (2) | |
| HEIGHT | ||
| 8" | (2) | |
| 18" | (6) | |
| 34" | (2) | |
| DEPTH (FRONT - BACK) | ||
| 24" | (2) | |
| 26" | (3) | |
| 27" | (1) | |
| WIDTH (SIDE - SIDE) | ||
| 28" | (1) | |
| 30" | (2) | |
| 55" | (2) | |
Support Stand, for single Steam'N'Hold or Evolution units, standard mounting height: 34-7/8" to bottom, stainless steel, with adjustable bullet feet
Support Stand, for single Steam'N'Hold or Evolution units, standard mounting height: 34-7/8" to bottom, stainless steel, with 5" casters
Support Stand, for double stacked Steam'N'Hold or Evolution units, Ergo-low mounting height: 8-7/8" lowest unit height, stainless steel, with adjustable bullet feet
Support Stand, for double stacked Steam'N'Hold or Evolution units, Ergo-low mounting height: 8-7/8" lowest unit height, stainless steel, with 5" casters
Equipment Stand, (2) shelves, 24" X 29", 48" high, stainless steel construction, for (2) 21CET8 or (1) 21CET8 & (1) 21CET16 or (2) 21CET16 steamers (P/N 1054251)
Equipment Stand, for single kettles only, open base, 28" x 26", 18" high, stainless steel top and square tubular legs with adjustable feet on front & flanged feet on rear
Equipment Stand, for single kettles only, open base with sliding drain drawer & splash screen, 28" x 26", 18" high, stainless steel top and legs, allows unit to be hard piped to a floor drain
Equipment Stand, open base with sliding drain drawer & splash screen, stainless steel top and legs
Equipment Stand, open base with sliding drain drawer & splash screen, for two SET10's or two SET15's, 55" x 20", 18" high, stainless steel top and legs, allows unit to be hard piped to a floor drain
Equipment Stand, open base with sliding drain drawer & splash screen, 55" x 20", 18" high, stainless steel top and legs, allows unit to be hard piped to a floor drain
(TS/10-1) Support Stand, for model TDB/6, 10 quart electric kettles bullet feet, open base, stainless steel, 21-1/2" x 28" x 18" high
(TS/10-2) Stand, bullet feet, stainless steel, for TDB & TDBC (20, 24, 40, 48)
(TS/10-3) Stand, bullet feet, stainless steel, for TDH & TDHC (20, 24, 40, 48) and TD/FPC
Equipment Stand, 29-1/2" wide, for electric counter kettles and braising pans, stainless steel frame, utility tabs, drain basin, stationary gutter and flanged feet on front and rear, drain basin on roller and ball bearings, integral splash shield/cover, includes mounting hardware, NSF
Equipment Stand, 29-1/2" wide, for electric counter kettles and braising pans, stainless steel frame, flanged feet on front and rear, includes mounting hardware, NSF
Español