| VENDORS | ||
| Alfa International | (11) | |
| All Points | (5) | |
| Eurodib | (12) | |
| Globe | (1) | |
| Hobart | (43) | |
| Nemco | (10) | |
| Omcan | (26) | |
| Robot Coupe | (51) | |
| Sammic | (20) | |
| Univex | (9) | |
| Waring | (16) | |
| PRICES | ||
| $ 20 - $ 100 | (51) | |
| $ 100 - $ 186 | (50) | |
| $ 186 - $ 297 | (52) | |
| $ 297 - $ 5,000 | (52) | |
| SIZE | ||
| .031" | (4) | |
| .063" | (3) | |
| .078" | (12) | |
| .100" | (1) | |
| .125" | (8) | |
| .156" | (14) | |
| .188" | (3) | |
| .218" | (3) | |
| .234" | (1) | |
| .250" | (9) | |
| .313" | (4) | |
| .375" | (4) | |
| .563" | (2) | |
| 0.6mm | (1) | |
| .750" | (1) | |
| 0.8mm | (1) | |
| 1.000" | (1) | |
| 2mm | (1) | |
| 4mm | (3) | |
| 5mm | (1) | |
| More ... | ||
5/32" fine slicer plate (4.0mm)
5/32" crimping slicer plate (4.5mm)
7/32" fine slicer plate (6.0mm)
9/16" slicer plate (14mm)
(4) Plate Pack, consisting of: (1) CCSCL-5/32, (1) CCSHRED-5/32, (1) SLICE-3/8-SS, & (1) DICEGRD-3/8
(3) Plates & Storage Rack, consisting of: (1) SLICE-1/16-SS, (1) SLICE-5/32-SS, (1) SHRED-3/16 & WALL-RACK
(6) Plates & Storage Rack, consisting of: (1) SLICE-1/16-SS, (1) SLICE-5/32-SS, (1) SLICE-7/32-SS, (1) SLICE-3/8-SS, (1) SHRED-3/16, (1) DICEGRD-3/8 & (2) WALL-RACK
1/2" Soft Slicing Plate (12mm)
3/8" Soft Slicing Plate (10mm)
5/16" Soft Slicing Plate (8mm)
5/8" Soft Slicing Plate (15mm)
1/16" fine slicer plate (1.5mm) for FP100
1/32" Slicing Plate (1mm), stainless steel knife, plate, hub & drive pin, replaceable knives
1/8" Slicing Plate (3mm), stainless steel knife, plate, hub & drive pin, replaceable knives
3/8" fine slicer plate (10.0mm)
5/16" Slicing Plate (8mm), stainless steel knife, plate, hub & drive pin, replaceable knives
5/32" fine slicer plate (4.0mm)
7/32" fine slicer plate (6.0mm)
Cutting Tool, slicer, 3/8" (10 mm), stainless steel (for Hallde CC-34, RG-50)
Cutting Tool, soft slicer, 3/8" (10 mm), stainless steel (for Hallde CC-34, RG-50)
Cutting Tool, soft slicer, 5/16" (8 mm), stainless steel (for Hallde CC-34, RG-50)
Cutting Tool, soft slicer, 5/8" (15 mm), stainless steel (for Hallde CC-34, RG-50)
Cutting Tool, soft slicer, 15/32" (12 mm), stainless steel (for Hallde CC-34, RG-50)
Cutting Tool, slicer, 1/32" (1 mm), stainless steel (cannot be used in combination with dicing grids) (for Hallde CC-34, RG-50)
Español