| SUBCATEGORIES | ||
| Equipment Stands | (1,080) | |
| Work Tables | (17,768) | |
| Work Centers | (138) | |
| Butcher Block Units | (80) | |
| Spreader Tables and Cabinets | (59) | |
| Utility Tables | (62) | |
| VENDORS | ||
| Admiral Craft | (14) | |
| Advance Tabco | (3,453) | |
| All Points | (15) | |
| Alto-Shaam | (14) | |
| APW Wyott | (12) | |
| Arctic Air | (1) | |
| Atosa | (25) | |
| Bakers Pride | (12) | |
| Berkel | (3) | |
| Beverage Air | (10) | |
| Bizerba | (5) | |
| BK Resources | (915) | |
| Blue Air Commercial Refrigeration | (24) | |
| Caddy Corporation | (17) | |
| Cal-Mil Plastics | (2) | |
| Channel Manufacturing | (9) | |
| Cleveland Range | (5) | |
| Comstock Castle | (32) | |
| Crescor | (3) | |
| Dean | (2) | |
| More ... | ||
| PRICES | ||
| (26) | ||
| Less than $ 545 | (2,377) | |
| $ 545 - $ 935 | (2,400) | |
| $ 935 - $ 1,333 | (2,401) | |
| $ 1,333 - $ 1,899 | (2,405) | |
| $ 1,899 - $ 2,568 | (2,397) | |
| $ 2,568 - $ 3,391 | (2,401) | |
| $ 3,391 - $ 4,858 | (2,402) | |
| $ 4,858 - $ 30,000 | (2,410) | |
| DEPTH (FRONT - BACK) | ||
| 10" | (221) | |
| 10-1/2" | (1) | |
| 12" | (282) | |
| 14" | (35) | |
| 15" | (841) | |
| 16" | (32) | |
| 18" | (843) | |
| 20" | (44) | |
| 21" | (6) | |
| 24" | (4,076) | |
| 24-3/8" | (10) | |
| 25" | (24) | |
| 26" | (7) | |
| 27" | (8) | |
| 28" | (1) | |
| 29" | (1) | |
| 30" | (4,531) | |
| 31" | (11) | |
| 32" | (2) | |
| 34" | (2) | |
| More ... | ||
| BASE CONSTRUCTION | ||
| aluminum | (48) | |
| galvanized | (3,219) | |
| stainless steel | (8,426) | |
| steel frame | (1) | |
| wood | (89) | |
| WORK TABLE SPLASH | ||
| contact factory | (1) | |
| without | (5,214) | |
| 1-1/2" | (1,406) | |
| 2" | (7) | |
| 4" | (2,421) | |
| 4-1/2" | (600) | |
| 5" | (1,166) | |
| 6" | (124) | |
| 10" | (214) | |
| GAUGE | ||
| contact factory | (14) | |
| 14 ga | (4,959) | |
| 16 ga | (5,122) | |
| 18 ga | (917) | |
| 20 ga | (16) | |
| TOP STAINLESS TYPE | ||
| wood | (42) | |
| 300 series | (7,809) | |
| 400 series | (2,047) | |
| WORK TABLE EDGE | ||
| contact factory | (54) | |
| marine | (14) | |
| marine/non-drip | (566) | |
| turn down/rolled/ | (1) | |
| turn down/rolled/bull nose | (9,079) | |
| WIDTH (SIDE - SIDE) | ||
| specify | (36) | |
| to be specified | (2) | |
| 12" | (16) | |
| 15" | (37) | |
| 16" | (3) | |
| 17" | (2) | |
| 18" | (68) | |
| 20" | (15) | |
| 21" | (2) | |
| 23" | (4) | |
| 24" | (101) | |
| 24-3/8" | (2) | |
| 27" | (1) | |
| 29" | (2) | |
| 30" | (105) | |
| 31" | (1) | |
| 32" | (4) | |
| 33" | (3) | |
| 34" | (1) | |
| 36" | (822) | |
| More ... | ||
| BASE TYPE | ||
| contact factory | (2) | |
| open cabinet w/drawers | (15) | |
| open legs | (7) | |
| open w/16 ga undershelf | (57) | |
| open w/18 ga undershelf | (1,273) | |
| open w/18 ga. undershelf | (12) | |
| open w/crossrails all sides | (18) | |
| open w/side & center crossrails | (47) | |
| open w/side & rear crossrails | (2,524) | |
| open w/undershelf | (2,816) | |
| open with 18 ga undershelf | (2) | |
| open with side & rear crossrails | (2) | |
| open with undershelf | (107) | |
| tubular | (4) | |
| undershelf | (5) | |
| 4 legs | (5) | |
| TOP CONSTRUCTION | ||
| aluminum | (81) | |
| chrome wire | (4) | |
| painted | (14) | |
| stainless steel | (5,359) | |
| wood | (136) | |
Drawer Assembly, 20" x 20" x 5", 430 type stainless steel housing & frame, removable drawer pan, NSF approved removable slides, hemmed safety pull handle (FLYER)
Drawer Assembly, 20" x 15" x 5", 430 type stainless steel housing & frame, removable drawer pan, NSF approved removable slides, hemmed safety pull handle (table must be field drilled for mounting)
Drawer Assembly, 20" x 15" x 5", 430 type stainless steel housing & frame, removable drawer pan, NSF approved removable slides, hemmed safety pull handle (table must be field drilled for mounting) (FLYER)
Drawer, 13-7/8" x 19" x 3", pull flange, built-in drawer stop, polymer
Drawer, 13-7/8" x 19" x 6", pull flange, built-in drawer stop, polymer
Drawer, 13-7/8" x 19" x 9", pull flange, built-in drawer stop, polymer
Spec-Master Heavy Duty Drawer Assembly, 20" x 20" x 5", 304 type stainless steel, insulated drawer front, removable drawer pan, self-closing drawer slides, stackable, hemmed safety pull handle
Spec-Master Heavy Duty Drawer Assembly, 20" x 15" x 5", 304 type stainless steel, insulated drawer front, removable drawer pan, self-closing drawer slides, stackable, hemmed safety pull handle (table must be field drilled for mounting)
Drawer, 20" x 20" x 5"D, stainless steel with polymer slides, for all 24" (front-to-back) standard tables (drawer will protrude past tabletop width)
Drawer, 15" x 20" x 5"D, stainless steel with polymer slides, for all 24" (front-to-back) standard tables (table must be field drilled for mounting)
Drawer, 20" x 20" x 5"D, stainless steel with polymer slides, for all 30" & 36" standard tables
Drawer, 15" x 20" x 5"D, stainless steel with polymer slides, for all 30" & 36" standard tables (table must be field drilled for mounting)
Drawer, 20" x 20" x 5"D with polymer slides for 36" tables with framing specified a 30-1/8" center line
Drawer, 15" x 20" x 5"D with polymer slides for 36" tables with framing specified a 30-1/8" center line (table must be field drilled for mounting)
Dishtable Undershelf, 24"W x 24-1/8"D, galvanized (FLYER)
Dishtable Undershelf, 36"W x 24-1/8"D, galvanized (FLYER)
Dishtable Undershelf, 48"W x 24-1/8"D, galvanized (FLYER)
Dishtable Undershelf, 24"W x 24"D, 18 gauge 400 series stainless steel
Dishtable Undershelf, 24"W x 24-1/8"D, 18/400 series stainless steel (FLYER)
Dishtable Undershelf, 36"W x 24"D, 18 gauge 400 series stainless steel
Dishtable Undershelf, 36"W x 24-1/8"D, 18/400 series stainless steel (FLYER)
Español
