1800 Series módulo de cóctel para bar, 60.96cmde ancho x 50.8cmD, 40.64cm de profundidad contenedor isotérmico para hielo, 60 libra(s). (de) capacidad, 7-circuito integrado(a) placa fría, (6) soportes para botellas dentro contenedor, 304 de acero inoxidable superficie, peto posterior & contenedor, 22/304 de acero inoxidable parte de adelante & extremos, nariz de toro borde frontal, galvanizada parte de atrás & parte inferior paneles, 4.1275cm O.D. patas tubulares galvanizadas pies de plástico ajustables en forma de bala, NSF
Fabricante | Eagle |
Modelo # | EAG-B2CT-16D-18-7 |
Empacado | Each |
WIDTH (SIDE - SIDE) | 24" |
CHEST INTERIOR DEPTH | 16" Deep Chest |
FINISH | Stainless Steel Top, Front, Ends And Galv Leg |
SPLASH | 4" |
DEPTH (FRONT - BACK) | 20" |
ICE CAPACITY | 125 Lb |
ICE BIN TYPE | 7-circuit Coldplate |
2200 Series Underbar Cocktail Unit, 24"W x 24"D, 16" deep insulated ice bin, 60 lb. capacity, (6) bottle wells inside bin, type 304 stainless steel top, front, backsplash & ice bin, galvanized bottom & back panels, bullnose front edge, 1-5/8" O.D. galvanized tubular legs, adjustable bullet feet, NSF
1800 Series Underbar Cocktail Unit, modular with 7-circuit cold plate, 24"W x 20"D x 33-1/2"H, 63 lb. capacity, 22/304 stainless steel top & front, 4-1/2" backsplash, bullnose front edge, galvanized back & sides, 8" deep fully insulated ice bin, (6) bottle wells inside bin, 1-5/8" diameter galvanized tubular legs, adjustable plastic bullet feet, NSF (FLYER)
2200 Series Underbar Cocktail Unit, modular with 7-circuit cold plate, 24"W x 24"D x 33-1/2"H, 63 lb. capacity, 22/304 stainless steel top & front, 4-1/2" backsplash, bullnose front edge, galvanized back & sides, 8" deep fully insulated ice bin, (6) bottle wells inside bin, 1-5/8" diameter galvanized tubular legs, adjustable plastic bullet feet, NSF (FLYER)
2200 Series Underbar Cocktail Unit, 24"W x 24"D, 12" deep insulated ice bin, 60 lb. capacity, (6) bottle wells inside bin, type 304 stainless steel top, front, backsplash & ice bin, galvanized bottom & back panels, bullnose front edge, 1-5/8" O.D. galvanized tubular legs, adjustable bullet feet, NSF