1800 Series módulo de cóctel para bar, modular, 60.96cmde ancho x 50.8cmde profundidad x 85.09cmH, 63 libra(s). (de) capacidad, 22/304 de acero inoxidable superficie & parte de adelante, 11.43cm peto posterior, nariz de toro borde frontal, galvanizada parte de atrás & lados, 20.32cm de profundidad/profundo totalmente térmico(a)(s) depósito de hielo, (6) soportes para botellas dentro contenedor, 4.1275cm de diámetro patas tubulares galvanizadas, pies de plástico ajustables en forma de bala, NSF
Fabricante | Eagle |
Modelo # | EAG-B2CT-18 |
Empacado | Each |
ICE CAPACITY | 65 Lb |
FINISH | Stainless Steel Top, Front, Ends And Galv Leg |
CHEST INTERIOR DEPTH | 8" Deep Chest |
WIDTH (SIDE - SIDE) | 24" |
SPLASH | 4" |
ICE BIN TYPE | Without Cold Plate |
DEPTH (FRONT - BACK) | 20" |
1800 Series Underbar Cocktail Unit, modular with 7-circuit cold plate, 24"W x 20"D x 33-1/2"H, 63 lb. capacity, 22/304 stainless steel top & front, 4-1/2" backsplash, bullnose front edge, galvanized back & sides, 8" deep fully insulated ice bin, (6) bottle wells inside bin, 1-5/8" diameter galvanized tubular legs, adjustable plastic bullet feet, NSF (FLYER)
2200 Series Underbar Cocktail Unit, modular with 7-circuit cold plate, 24"W x 24"D x 33-1/2"H, 63 lb. capacity, 22/304 stainless steel top & front, 4-1/2" backsplash, bullnose front edge, galvanized back & sides, 8" deep fully insulated ice bin, (6) bottle wells inside bin, 1-5/8" diameter galvanized tubular legs, adjustable plastic bullet feet, NSF (FLYER)
1800 Series Underbar Cocktail Unit, 24"W x 20"D, 16" deep insulated ice bin, 60 lb. capacity, 7-circuit built-in cold plate, (6) bottle wells inside bin, 304 stainless steel top, backsplash & bin, 22/304 stainless steel front & ends, bullnose front edge, galvanized back & bottom panels, 1-5/8" O.D. galvanized tubular legs adjustable plastic bullet feet, NSF
1800 Series Underbar Cocktail Unit, 24"W x 20"D, 12" deep insulated ice bin, 60 lb. capacity, (6) bottle wells inside bin, 304 stainless steel top, backsplash & bin, 22/304 stainless steel front & ends, bullnose front edge, galvanized back & bottom panels, 1-5/8" O.D. galvanized tubular legs adjustable plastic bullet feet, NSF