TSD Series extra (de) capacidad contenedor/ Cóctel módulo, modular, 60.96cmde ancho x 60.96cmD, aproximadamente 75-libra(s). de capacidad de hielo, 15.24cmde altura del peto posterior con 2.54cm peto en la parte superior, parte superior de plástico ABS cornisa/borde lateral, 38.1cm de profundidad de acero inoxidable acero depósito de hielo, de acero inoxidable parte de adelante & lados, acero galvanizado parte de atrás & parte inferior, 1.27cm NPS macho drenaje, 4.1275cm tubular de acero inoxidable patas con 2.54cm pies termoplásticos ajustables
Fabricante | Perlick |
Modelo # | PER-TSD24IC-EC |
Empacado | Each |
DEPTH (FRONT - BACK) | 24" |
ICE BIN TYPE | Without Cold Plate |
FINISH | Stainless Steel Top, Front, Ends And Legs |
CHEST INTERIOR DEPTH | 15" Deep Chest |
SPLASH | 6" |
ICE CAPACITY | 75 Lb |
WIDTH (SIDE - SIDE) | 24" |
TS Series Underbar Ice Bin/Cocktail Unit, modular, 24"W x 24"D, approximately 50-lb. ice capacity, 6"H backsplash with 1" return at top & rear deck, ABS plastic top ledge, 10-3/4" deep stainless steel ice bin, stainless steel front & sides, galvanized steel back & bottom, 1/2" NPS male drain, 1-5/8" tubular stainless steel legs with 1" adjustable thermoplastic feet, NSF
TSD Series Extra Capacity Underbar Ice Bin/Cocktail Unit, modular with cold plate, 24"W x 24"D, approximately 75-lb. ice capacity, 10-circuit aluminum cold plate concealed under bin liner, 6"H backsplash with 1" return at top, ABS plastic top ledge, 15" deep stainless steel ice bin, stainless steel front & sides, galvanized steel back & bottom, 1/2" NPS male drain, 1-5/8" tubular stainless steel legs with 1" adjustable thermoplastic feet
Tobin Ellis Signature Ice Chest, modular, 42"W, approximately 92 lbs. ice capacity, 6"H backsplash with 1" return, ABS plastic top ledge, stainless steel top & sides, stainless steel interior,galvanized steel back & bottom, 1/2" NPS drain, stainless steel legs with adjustable thermoplastic feet
Tobin Ellis Signature Ice Chest, modular, 30"W, approximately 64 lbs. ice capacity, 6"H backsplash with 1" return, ABS plastic top ledge, stainless steel top & sides, stainless steel interior, galvanized steel back & bottom, 1/2" NPS drain, stainless steel legs with adjustable thermoplastic feet